Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
February 25, 2018, 04:10:59 PM
Pages: [1]
Author Topic: Reliant Scimitar SE5a Steel wheels (4.1/5"PCD)  (Read 1611 times)
0 Members and 1 Guest are viewing this topic.
Sr. Member

Karma: 2
Posts: 139

« on: December 16, 2009, 04:50:39 PM »

Remind me someone will these fit my van ...they are 5.1/2"J steel rims, the Wolfrace slot mags are 6J and will definietly be sticky outy .. but I read somewhere they will also do the job ...I know where there is a set but they are a bit rare and expensive. I am guessing the steel wheels will do but what about spacers and stud lengths anyone got any experience ??


Global Moderator
Ultimate Enthusiast

Karma: 14
Posts: 2535


« Reply #1 on: December 16, 2009, 07:35:42 PM »

Hi mike 5 1/2 " is the correct PCD..they will fit on the rascarry  the width depends on the offset...if you can find out what the measurement is from the mating face to the edge of the rim ...put a flat stick across the rim and measure to the mating face..in my experience any more than 110mm and it will rub on the front springs...

if they are steel wheels then the studs should be long enough...
Pages: [1]
Jump to: